3AT1023

• CPU

  •    Support all SoM 3SM1007 series
  •    NXP i.MX7  Solo/Dual ARM® Cortex®-A7 CPU + ARM® Cortex®-M4 CPU
  •    Heterogeneous Multicore Processing architecture
  •    A7 processors Frequency up to 1200 MHz
  •    M4 processor Frequency 266 MHz

• MEMORY

  • Up to 2 GB DDR3L up to 1066MHZ (32 bit)

• STORAGE / BOOT*

  •    SPI Nor Flash for bootloaders
  •    Up to 512 MB NAND FLASH memory (optional)
  •    Up to 64 GB eMMC 5.0 (optional)
  •    µSD card connector

• MULTIMEDIA AND HUMAN INTERFACE*

  •    Image processing PXP, v3.0
  CSC, Resize, Combine, Rotate
  HW Dithering, Basic 2D Blit
  •    LVDS 24 bit display connector (obtained from MIPI-DSI i.MX7 output)
  •    Parallel 24 bit RGB video port (alternative to WEIM interface)
  •    MIPI-CSI camera connector (see also Camera module 3AT1019)

• I/O PERIPHERALS*

  •    USB 2.0 OTG micro USB connector
  •    USB 2.0 Host type A USB connector ( alternative to PCIe port)
  •    2 x Ethernet 10/100/1000 connector (second Ethernet port alternative to WEIM interface)
  •    2 x FLEXCAN BUS Interfaces on expander connector 3
  •    2 x SPI, 8 x ADC input, I2C, uart on expander connector 2
  •    miniPCIe x1 connector ( alternative to USB 2.0 Host)
  •    SIM Card connector
  •    Audio line Input connector
  •    Audio microphone input connector
  •    Audio headphone input connector
  •    RS232 connector
  •    1x RS-232/422/485 selectable via SW on expander connector 3
  •    Full WEIM interface on expander connector 1 (alternative to second Ethernet port, Parallel 24bit RGB and QSPI interface)
  •    Debug micro USB connector (FTDI)

• SYSTEM

  •    Single +12÷24 VDC ±5% supply
  •    Power consumption depends on MPU clock frequency / state and peripherals in use
  •    RTC integrated in i.MX7 Application processor. Battery CR1220
  •    Dimension: 160 x 125.5 x 22mm

• TEMPERATURE**

  •       0 to +70°C for Commercial version
  •    -20 to +85°C for Extended version

• OPERATING SYSTEMS

  • Linux

^*Please note that all function may not be available simultaneously, due to pin muxing limitation of SOM connector restrictions. Function availability depends also on the installed processor. For more details refer to processor datasheet.

^**Appropriate cooling measures must be provide