Q5
NXP i.MX53x ARM Cortex-A8
Caratteristiche
- Support i.MX534/i.MX535/i.MX536/i.MX537 processors
- High pin multiplexing flexibility on 240pin connector
- Industrial and automotive applications
- Low power consumption
- Rugged System On Module
- Small dimensions only 50 mm x 50 mm
3SM2000 Q5 SOM Module Freescale Basato sulla piattaforma Freescale i.MX53, questo nuovo modulo include un core ARM Cortex-A8 con frequenze di clock fino a 1.2GHz. Supporta la riproduzione di video full HD (1080p) multi standard, con la possibilità di avere doppia uscita video e accelerazione grafica avanzata che garantiscono un interfaccia utente più responsiva con consumi veramente ridotti. I moduli i.MX53 di ElettronicaGF sono progettati per ridurre i tempi di sviluppo e i costi della carrier board. Nonostante le dimensioni molto contenute, tutte le periferiche comunemente utilizzate sono già integrate sul modulo, per esempio: – fino a 1GB DDR3 RAM – LAN 10/100 – uscite video LVDS / parallela/ VGA Video Output – SDIO,I2C,SPI bus – porte USB OTG, USB HS/FS/LS – connettore JTAG per debug L’uso di una singola alimentazione, inoltre, semplifica enormemente il progetto e l’industrializzazione della carrier board. I moduli i.MX53 supportano sistemi operativi Linux.
-
CPU
• NXP i.MX534/i.MX535/i.MX536/i.MX537 application processor:
ARM® Cortex®-A8 CPU up to 1.0 GHz
NEON coprocessor
Vector Floating Point unit (VFP) -
MEMORY
• Up to 1 GB DDR3-800 SDRAM memory (32 bit BUS)
-
STORAGE
•Various storage options available*:
0/256MB/512MB NAND Flash memory (bigger flash memory sizes available on request)
Optional onboard eMMC memory (start from 2GB eMMC, other sizes available on request)
Optional onboard microSD connector
SATA port available
Fully customizable boot sequence on carrier board, without need to burning eFuses -
MULTIMEDIA AND HUMAN INTERFACE*
• Powerful Graphics 2D/3D accelerator for rich UI design
• Up to 2 LVDS Video outputs
• Up to 2 full 24bit parallel RGB Video outputs
• VGA video output
• Up to 2 Camera Sensor Interfaces
• 1x SPDIF transmitter output and input
• 1x I2S audio output
• 1x Keypad Matrix 4×4 controller (16 keys)
• 3x status LED -
I/O PERIPHERALS*
• Up to 3x MMC / SDIO / SD card interfaces (3V3)
• 1x USB OTG 2.0 LS/FS/HS
• 1x USB Host 2.0 LS/FS/HS
• 1x Additional USB Host 2.0 LS/FS/HS (Require external ULPI Transceiver on Carrier Board)
• 1x Full Ethernet 10/100 BASE-T with onboard PHY
• 2x CAN controllers
• Up to 3x UART (TX,RX,RTS,CTS)
• Up to 3x I2C busses
• Up to 2x SPI busses
• Up to 2x PWM outputs from iMX53
• Additional 2x PWM outputs from PMIC
• 2x ADC Input from PMIC
• 1x One Wire
• 1x 4Wire Resistive touch screen interface
• On-board Temperature Sensor (optional)
• On-board Accelerometer (optional) -
SYSTEM
• 1x Unique Power Supply Input 5V
• 1x Power Supply Output 3.2V for Carrier Board
• 1x Power Supply Output 1.8V for Carrier Board
• 1x Power Supply Output 2.775V for Carrier Board
• Power-ON and RESET input/output
• Onboard RTC functionality -
TEMPERATURE**
• 0 to +70 °C for commercial version
• -40 to +85 °C for industrial version -
OPERATING SYSTEMS
• Linux
*Please note that all function may not be available simultaneously, due to pin muxing limitation of SOM connector restrictions. Function availability depends also on the installed processor. For more details refer to processor datasheet.
**Appropriate cooling measures must be provided.
